Home
Stair Videos
 
 
Plywood Marked and Ready To Cut - Stair Risers
 

I found some scrap plywood sheets that were left over from the floor sheathing and I will be using them to cut as many stair risers as possible. Most 36 inch wide stairways require 14 risers and they can usually be cut from one single piece of plywood, if laid out correctly.

Remember, you can cut your stair risers against the grain of the plywood, but you shouldn't ever cut your stair treads against the grain.

Back To Split Level Stair Framing  Articles  Stair Books  Building Codes

 

 

Home Sitemap Disclaimer

Southern California Contractor Stairs Roof Building House Inspections Foundations

 

All content copyright 2010 Greg Vanden Berge. All rights reserved.
You MUST GET WRITTEN PERMISSION to reprint or republish any of this material.